KZFM550A 4-in-1 Case Erector Packer Sealer Palletizer

Robot section for case opening and loading - Both the case and the grouped products are transferred by the robot section under servo control, keeping the number of fixed transfer points low on lines that handle several carton formats.

In-machine product collating, not pallet stacking - The stacking element in the machine name refers to the product-collating system listed inside the monoblock; no palletiser is described, so the quoted 10 cycles/min is a case-packing rate and downstream palletising remains a separate scope item.

Published utilities: 220 V / 50 Hz, 5.5 kW, 0.6 MPa - These three figures define the electrical feeder, the installed load and the compressed-air drop that must be available at the installation position before commissioning starts.

4000 x 2900 x 1850 mm frame at 1.3 t - The footprint and mass set the floor loading and the clear space needed around the guards; at 2.9 m wide, the operator side and the case magazine access have to be drawn into the line layout as well as the infeed and outfeed runs.

Stand-alone or inline configuration - The source allows the unit to run alone or coupled to an upstream packaging machine; with a robot transfer section, the layout has to reserve the working envelope of the arm in addition to the conveyor width.