KZF550C 3-in-1 Case Erector Packer Sealer

Full-servo designation on the opening and loading axes - With both strokes under servo control, acceleration and deceleration can be set to suit the product being handled; for light cartons this is the setting that keeps a collated layer from shifting before the case is closed.

14-inch HMI with automatic counting - The large panel is specified together with PLC control and automatic counting, giving the operator count and status information in one place during long single-format runs.

Four named alarm conditions - Fault, material shortage, no-case and jam alarms are listed separately, so an empty case magazine can be distinguished from a product stop at the transfer point without stepping through the whole sequence.

Two consumable insertion stations in one cycle - Top and bottom pads and the certificate are placed within the same machine cycle; the practical consequence is that pad and document replenishment intervals have to be included in the planned run length between operator stops.

Servo-set case opening for varied formats - The case opening mechanism is servo driven while the collating section is adjusted to the product dimensions, so a change in product specification is handled on the drive and collating settings rather than by replacing fixed case-forming tooling.